Tuesday, 12 April 2022

Adobe Photoshop Elements 2019 17.0 keeps re building content and effects at startup

Every time you start Adobe PhotoShop Elements 2019 (this is version 17.0 build 20180830.m.125874) you get a message and progress bar showing Building Content and Effects. This can take 2-3 minutes to complete and PhotoShop Elements isn't responsive until it completes. Almost looks like the app has frozen at times. It completes and you can work on your image, but it will repeat the same process next time you load the program.

Adobe PhotoShop Elements Building Content and Effects

It is caused by a missing MediaDatabase.db3 file which should be located in the folder;
C:\ProgramData\Adobe\Photoshop Elements\17.0\Locale\en_US

In this case the en_US folder had been renamed to en_USupsell_pods by a failed update. Just remove the 'upsell_pods' from the folder name so that it looks like this ...

Next time you start Elements it will rebuild one further time, to create the missing MediaDatabase.db3 file. It then starts a lot quicker on subsequent loads.


Saturday, 23 October 2021

Adding a Mitel 5201 phone to a 3300 controller


Previously we've been able to just change the MAC address on the 3300 controller when we swapped out faulty phones, but had some problems with that recently. The phones were appearing on DHCP and in the unprogrammed IP phones list (see under Maintenance > IP Telephone Inventory) but weren't actually picking up the extension number.

The phones start up normally, light flashing for a minute or so before going out for a couple of seconds and then re-appearing solid. Turns out the solid light indicates its in registration mode.

Make sure the previous MAC address of the old phone is cleared from extension number (Users and Devices > Advanced > IP telephones > Single line) and that it doesn't reappear after a few seconds (that would indicate the old phone is still online). Then on the phone you have to type the registration sequence NNNXXXX followed by the Hold key. NNN is the Registration Access Code (System Properties > System Feature Settings > System options) and XXXX is the extension number.

If succesful the light should go out and you get a dialtone. If it fails you'll see the light blink quickly and stay on solid.

I did notice the previous Registration Access Code was ### not sure whether that's what it actually was or if that means its masked. There's also a Replacement Access Code which I guess might get you around having to delete the MAC address of the previous phone.


Wednesday, 13 October 2021

Dell OptiPlex 7070 external speaker humming with Realtek audio driver

The external speaker on my Dell OptiPlex 7070 SFF starts humming every few minutes. A quiet low level, deep hum. Sounds a little like the speaker is vibrating on the desk. You can clear it by playing some audio or clicking the volume control button to make it ping. This is happening on Windows 11.

The installed driver is the latest one from Dell using the Command Update software. Its listed as version 6.0.9235.1 (7 Sept 2021). The problem goes away again if you revert to the Microsoft driver "High Definition Audio Device" version 10.0.22000.1 dated 5 June 2021.

To install it right-click on the Windows menu, choose Device Manger then Sound, video and game controllers. Right-click Realtek Audio > Update Driver > Browse My Computer for drivers > L
et me pick from a list and choose the High Definition Audio Device. You can accept the warning about compatibility.

Friday, 5 March 2021

HP ProDesk 400 offline missing ethernet network adapter

Possibly the strangest call for a while ... a cat stepped on the keyboard and the computer went offline! Tried all the obvious fixes for airplane mode, reset network, troubleshoot network, BIOS, etc, then spotted there was no ethernet device in the Network Adapters section of the Device Manager. Just the WAN Miniport drivers. You can see in the image a typical list - the Realtek is the ethernet cabled network connection. GBE stands for Gigabit Ethernet.

Looking under View > Show Hidden Devices revealed the Realtek driver, greyed out, not recognised by Windows as a current device. Updating the driver didn't recover it. Uninstalling it removed it completely and it didn't come back when clicking Scan for Hardware Changes.

The fix was to reload the driver from the latest HP download (transferred via USB flash drive from an online computer)
https://ftp.hp.com/pub/softpaq/sp95501-96000/sp95572.exe

Realtek Ethernet Controller Drivers version 10.32.1206.2018, dated 9 Apr 2019, at time of writing this.

Thursday, 6 June 2019

Outlook 2016 with Gmail keep getting prompted for "Sign in with your Google account" IMAP

Outlook 2016 loads up with a Google Gmail or Googlemail account configured and imediately prompts with a Sign in with your Google account prompt. It happens as soon as the Send/Receive runs to download new messages.

You might see error 0x800CCC0E Outlook cannot synchonize subscribed folders.

If you login, it prompts to authorise Microsoft, which you can do. It just doesn't seem to retain that setting and keeps prompting. Everything looks ok and correctly authorised if you look at https://myaccount.google.com/security

The account is an auto setup from the Outlook 2016 email wizard when you Add Account, which configures IMAP with servers imap.gmail.com and outgoing as smtp.gmail.com

In fact the same setup worked perfectly on another computer. Recreating the profile, the account, checking OST, etc would not fix the problem.

In the end, the fix was found to be related to the account having previously been a @googlemail.com account. If you manually change the servers to be:
   *      Incoming server:  imap.googlemail.com
   *      Outgoing server:  smtp.googlemail.com

the problem is fixed and your Gmail in Outlook will work normally.

Tuesday, 19 March 2019

Bootrec rebuildbcd or scanos - total identified Windows installations: 0

We've just had a Windows 8.1 Lenovo laptop that stopped booting. It reported attempting Automatic Repair and kept failing and rebooting through the same cycle.

The advanced options after that has failed also gave you you a startup repair option. That wasn't able to fix the fault either.

The usual fix under those circumstances is to go into advanced options, choose command prompt, then load Diskpart. From there you can fix the drive letter order if its got changed, remove unnecesary drive letters. Then fix the boot table using the bootrec command - often a chkdsk followed by deleting/renaming the existing Boot folder, then running bootrec /fixmbr, then bootrec /fixboot, and bootrec /rebuildbcd, will do the job.

The error reported was Total identified Windows Installations: 0

In the end the fix was from the command prompt option, but we had to go into C:\Windows\System32\Config and rename the registry files (Default, Sam, Security, Software, System), eg. default.bak. Then copy the replacement files from the Regback subfolder where there is a recent backup.

The laptop rebooted with no bootrec tweaking needed.


NOTE - Looks like since Windows 10 version 1803, Microsoft are no longer creating a backup in Regback. You can still recover registry files from a Shadow Copy. See this article for details https://theitbros.com/restore-windows-10-registry-from-backup-or-restore-point/

Sunday, 9 December 2018

0x800F081F can’t install Microsoft .NET Framework 3.5 in Windows 10

Had a few instances of installing specific business software or older programs that get a prompt in Windows 10 that .Net 3.5 will be required. They'll either try and add it and fail or you'll attempt to manually install it from the Windows Features section of Control Panel > Programs.

Often you get error 0x800F081F saying that the source files could not be found.

We've regularly seen this in a Windows Small Business Server environment, eg SBS 2008 or SBS 2011. The key fact here is that there's an on-site WSUS server providing local Update Services. Unfortunately it doesn't have the download available for .NET 3.5 for Windows 10 Pro.

There are several recommended fixes involving using a Windows 10 USB installer or downloading the Windows 10 ISO - not always practical on a remote support session - and they don't always seem to work. The best fix and the simplest option we've found to be effective is s asmall registry change, which tells Windows to contact Microsoft directly for Features and Repairs, and not use WSUS.

Use Windows-R for a Run box or type directly into the Cortana Search or Start menu,
   gpedit.msc
which should let you Edit Group Policy, see image above.

Look in Computer Configuration > Administrative Templates > System, for the setting 'Specify settings for optional component installation and component repair'

Turn it to Enabled and tick the box 'Download repair content and optional features directly from Windows Updates instead of Windows Server Updates Services (WSUS)'

You might need to start a CMD prompt (use Window-R again) and type 'gpupdate /force' to get the new setting to be applied immediately.

Wednesday, 1 August 2018

Buffalo DriveStation backup error on SBS Server 2008 (msexchangeis 9782, error code '2155348010')

Attaching a new Buffalo Drivestation 3TB Velocity USB 3.0 backup drive (HD_LXU3) to an old Windows Server 2008, which is part of Small Business Server 2008, reminded us of an error we'd not seen for a few years.

The standard Windows Server backup failed to run within a couple of minutes, despite having been configured for the new drive.



The Event Log showed an Exchange error from source msexchangeis with event id 9782. This was a little misleading, because all the exchange esetuil diagnostics and repairs will show no fault. A little further on in the event viewer you might also see an error that the backup failed with following error code '2155348010' and event id 517, which is a little more useful.

The fault lies with the fact that the Server 2008 Backup doesn't support larger capacity drives with the newer Advanced Format using 4096 byte sectors. It will only backup to a drive formatted with 512 byte sectors. Note that this is referring to the drive format sector size, not the volume or partition sector size.

If you're lucky, the USB drive you've bought had a download that will allow you to reformat the drive. Western Digital (WDC) have the WD Quick Formatter utility. More background detail and a link in this thread https://social.technet.microsoft.com



Buffalo have a similar utility, but its not available on the UK support page! Instead, if you head over to their Japanese support page http://buffalo.jp/support_ap/support/products/hd_lxu3.html and download the DriveFormatter2 program (its in English), you can reformat with 512 byte sectors. Select the correct drive and choose option 2: NTFS (Win 8, 7, Vista)


Thursday, 5 July 2018

Avastclear gives error 'stub cannot run installer / updater ...'

We've had a few license warnings for Avast Business Antivirus Cloudcare recently. Usually when upgrading, eg from Cloudcare 4.2.x to 4.3.0. To fix the licence warning you usually need to uninstall the current version, reboot and reinstall the latest. Even then it doesn't always work and using avastclear, the official uninstaller program from Avast / AVG is the way to go. Note that this should be run from Safe Mode.

When you run avastclear you might see the error shown in the diagram here.

"The stub cannot run installer / updater executable 'c:\users\   \appdata\local\temp\_av_iup.tm~
\instup.exe' (code 0x10b)"

Took a while to work this out - you need to be logged into Safe Mode as the local administrator, not a domain admin account.

Then the uninstall will run and reboot.




15/10/18 Update - also seen this warning with some sort of permission issue, had to move the avastclear program to another directory, eg c:\temp or c:\windows\temp
 
 9/12/18 Update - Permission issue if you downloaded as the domain user then switched to local, try making a copy of avastclear and run that instead

Tuesday, 29 May 2018

Update: Lost or forgotten iPad Parental Restrictions PIN code

A quick update to a popular post from a couple of years ago. We talked about recovering the Apple parental control restrictions PIN from an iPad backup file.

Just had to repeat the exercise on another iPad. There's a newer, more useful article at igeeksblog that links to a Windows program called pinfinder.

You can download pinfinder from here
https://github.com/gwatts/pinfinder/releases/download/1.4.0/pinfinder-windows-64bit-1.4.0.zip

Just spotted that there's an updated version, that seems to show some more useful info
https://github.com/gwatts/pinfinder/releases/download/1.6.0/pinfinder-windows-64bit-1.6.0.zip

Tuesday, 20 March 2018

How to remotely read a Dell Optiplex Tag number (serial no) via command prompt

There are plenty of management tools that will gather the data for you, but if you're on a domain network and just need a quick way to gather some serial numbers for known computer names, try this method using the command prompt shell.

Dell support have a useful document telling you how to use the command
WMIC BIOS GET SERIALNUMBER to retrieve the Dell serial number, aka Tag Number.

Often that command is blocked by firewall and security settings if you try to run it remotely using the /Node option. Similarly for PowerShell commands using the Get-WmiObject command. I also couldn't find any useful info in the registry either via regedit, so no quick shortcut with Remote Registry service.

By far the quickest and simplest way was to take advantage of the Sysinternals PSExec command. This allows you to run a remote command shell from a local computer.


So on your server or PC logged into the domain as an admin, you'd start a command prompt and run the commands:

1)
PSEXEC \\ CMD
   to start a command shell running on the computer called but displaying locally

2)
WMIC BIOS GET SERIALNUMBER
   to retrieve the serial number of the connected computer

3)
EXIT
   to close the remote command prompt and return to your local prompt

Thursday, 25 January 2018

ACT spell check cannot be performed

An ACT Premium v19.2 user logged into a new PC couldn't run the spell check on a letter created in ACT with one of the document templates. They got the error shown below;
Spell check cannot be performed because the main dictionary was not found
In ACT, look under Tools > Preferences > General. Then under Locations change to Spelling Dictionary, to see the folder where the dictionary was expected to be located.

Its likely to be something like C:\Users\\AppData\Roaming\Act\Act Data\Spell. Now go and check that directory and you'll probably find a CUSTOM1.DIC file, but no MAIN.DCT file.

Back at the top level of Users do a search for MAIN.DCT - we found it in C:\Users\Public\Public Documents\Act\Act Data. Just copy (not move!) the file over to the correct location, identified above. So it should look like this;

Wednesday, 6 December 2017

Can't type username in ACT Premium Web login (greyed out)

We had an ACT v19.2 client unable to use the remote internet login via ACT Premium Web access. When they got to the sign-in screen for ACT it showed the database name correctly, but the username and password prompts were greyed out. You weren't able to type anything in those fields and consequently were unable to login.


At first we suspected some Microsoft updates to .NET that had been loaded on the server over the weekend. However it turned out to be less obvious, the Protexis Licensing V2 service that is located on the ACT server had stopped and failed to restart. Once this was started again, the ability to type username and password in the browser was restored.

Friday, 17 November 2017

3 PCs missing from AVG Avast Cloudcare Console

Strange problem at one site with AVG CloudCare v3.6.4. Only one of 3 particular PCs would ever appear in the console at once. Lets call them PC26 (Maint), PC29 (Chef) and PC31 (Accts). This week PC29 was listed, status ok, updates ok. It even had the correct label name against it showing that is was Chef's computer. I tried reinstalling PC31 which succeeded, but it appeared on the list with the name Chef rather than Accts - and PC29 dropped off the list. I relabelled it to Accts, then PC29 came back on the list instead but with the new label.

Took me a while initially to realise that all three were essentially sharing one database entry and the last change/install took precedence as far as the console list was concerned.

Also tried removing AVG CloudCare off all three PCs at once and using the AVG Remover tool, rebooting, then reinstalling each one. And the same again but with the brand new 4.0.2 release of Avast Business Cloudcare. No chance.

In the end, after 25 mins online with tech support, we used the 'setup.exe -b' command to re-register the clients to the CloudCare database and reset registry keys. This cleared the problem and all clients came up normally.


To use setup -b, start a command prompt with Admin rights. Then change to the appropriate directory, depending upon client and 32 or 64 bit, eg
C:\Program Files(x86)\AVG\CloudCare   or
C:\Program Files(x86)\AVAST Software\Business Agent\



Monday, 3 July 2017

1and1 Cloud Virtual Server outgoing smtp email blocked

Got a new VPS hosting server with 1&1, its one of their Cloud Virtual Servers based on SSD, nice and speedy. Obscure problem with the first WordPress site which wouldn't send outgoing email using phpmail.

Went through all the firewall policy, server settings, Plesk, OS, WordPress - nothing obvious. All you can see is emails queuing in the outgoing queue in Plesk. Look under Tools & Settings > Mail > Mail Server Settings > Mail Queue.


Clicking on the email shows it received by the host.

After double-checking all the settings, again, turns out its an overriding outgoing port 25 block set by 1and1. You have to phone support and get the outgoing block taken off port 25 - it doesn't appear in the control panel(s) or the firewall policies. Good luck finding a first line tech that's heard of it too :-)

Friday, 23 June 2017

Dell Optiplex 7040 Realtek clicking popping audio sounds

Looks like the latest audio driver from Dell has fixed a sound problem where you could hear clicking and popping, sometimes interference, sounds whilst playing music or adverts. It was most obvious on Spotify. This is using the built-in Realtek Audio hardware.

Previous driver was 6.0.1.6111 dated 12 Aug 2016 and the update is 6.0.1.6117 dated 19 Dec 2016, listed as Dell revision A07. Download Audio_Driver_RT1XX_WN32_6.0.1.6117_A07.EXE 

Worth noting the Dell Command Update utility (v2.3.1) for checking if updates are available, didn't list this particular audio driver update for download. We only spotted it when manually checking the Dell support website.


(Just for completeness - we'd also loaded BIOS 1.5.10 dated 9 May 2017 at the same time, but don't think that was relevant. There was mention of a LAN driver possibly causing audio interference, this system was already on the latest Dell download 20.4 A01 with driver 12.13.17.7 dated 5 Oct 2015 for Intel l219-LM. Intel have a newer release 22.3 ProWinx64 with driver 12.15.25.6 dated 19 Mar 2017. Hyper-V and VMware virtual adapters were present)

Wednesday, 31 May 2017

Draytek Vigor 2760n dial-in VPN update

Just spotted a useful firmware update from Draytek for their Vigor 2760 / 2760n / 2760Vn range which adds an important VPN feature.

In a previous article on the Draytek 2760 I mentioned that although the early revision of the hardware (which uses firmware 1.x) has dial-in VPN support (PPTP, L2TP) the later hardware revision with firmware 3.x didn't provide dial-in VPN. Got caught out by that change before!


Guess what Draytek fixed with the 3.8.2.1 firmware - they've added support for SSL VPN Remote Dial-In user connections. Excellent news - will be testing as soon as I get opportunity.

Sunday, 26 March 2017

SBS 2008 Best Practice Analyzer (SBS BPA) out of date, error ocurred trying to access the web

The Best Practice Analyzer (BPA) for Small Business Server 2008 (SBS2008) reports 'An error occurred trying to access the web' when it tries to update.


If you click on the 'About the Best Practices Analyzer' link you might see an older update than Configuration File version: 2.1.60.0






[ We had an SBS 2008 server that blue screened and had to be restored using a SystemState backup and SFC system file check - somewhere along the way we ended up with an old configuation file version of 2.1.5.0. When run, this threw up an error about WSUS 3.0 needing SP1, when SP2 was actually installed. ]

You can manually update by copying a newer SBSBPA.CONFIG.XML file into the C:\Program Files (x86)\SBSBPA\en directory.


Saturday, 1 October 2016

Sage 50 Accounts: Email Invoice / Purchase Order / Statement and save in Outlook Inbox not Drafts

When sending an email copy of an invoice or statement or purchase order from Sage 50 Accounts v22 (2016), the customer wanted the email to be held in Outlook before dispatch. That allowed an extra check and for them to be certain it was transmitted.

In Sage, under Settings > Email Defaults, you can specify for each type of attachment (Invoice or Sales order or Statement or Purchase Order or Remittance) whether the Sending Option should Save to Mailbox or Send Immediately.

They also wanted the email to be held in the Inbox of the Outlook 2010 client, not in the Drafts folder. This is an Outlook setting, not a Sage one. Look under Outlook > File > Options > Mail > Save messages > Save to this folder: Inbox

Monday, 5 September 2016

Dell Vostro 3300 fails to upgrade to Windows 10, error 0xC1900101 - 0x30018

A Dell Vostro 3300 laptop failed to upgrade to Windows 10 on several different attempts. Interestingly after fitting a new hard drive and performing a clean install of Windows 10, it completed without issue - suggesting that there was a driver issue with the existing Windows 7 configuration.

After much troubleshooting, we pinpointed the issue to the ExpressCard port. Simply disabling this in BIOS and then re-running the Win 10 upgrade, completed the upgrade without issue.

To disable, keep tapping F2 at startup when the Dell logo is on the screen. Move right into the Advanced Menu, then the Configuration options. You should see ExpressCard most of the way down the list. Press Enter, choose Disabled, then Enter and use Esc to quit, saving changes.

PS Make sure you've already loaded the latest A12 BIOS update from Dell Support.

Trust 1&1 Internet for your domain name registration, from only £1.99/year!. Check now!